the MassMind
...content heavy,
light sales...
NOTICE: This store is closing
Kits | Books | Gadgets | Cables | Services | Stepper Drivers
Products > Stepper Drivers > RULMS3_FAN2:Heatsink/Fan YOU drill & tap (1/AXIS)

These CPU cooler fan / heat sink units work very well for cooling hot driver or stepper motors. The active movement of air is far more effective than passive heat sink radiation.

Fan motors run on 5 to 12 volts.

These units are NOT drilled or tapped for the mounting of the drives. You will need to drill and tap for your own mounting hardware.

The size is about 2x2x1.5 inches (50x50x40 mm). This provides more than enough surface area for the chips or drive transistors. The driver PCB will be secured separately. See mounting options for the THB6064AH or Linistepper.
RULMS3_FAN2:Heatsink/Fan YOU drill & tap (1/AXIS) $5.00 Backordered!   Expected in 2 weeks

You may also be interested in:
416074 Cools the THB6064AH drivers
416080 cools DC motor driver
416015 cools the linistepper drivers

user @3.237.15.145, your shopping cart is empty.

James Newton's MassMind.org offers Kits, Books, Gadgets, Cables, Services, and these Stepper Drivers:

Picture of item #4160124Axis5:
BOB/Pulse/Power(PC Board ONLY)
:
 $8.00  in stock
4Axis5_c11M:Cable for 1 driver (1/AXIS) PMinMO STD $3.00 1 in stock
4Axis5_pc:DB25 conn & cable for PC parallel port $9.95 2 in stock
4Axis5_pulse: Pulse generator parts ONLY $4.95 3 in stock
4Axis5_pwr:5V regulator parts $2.00 2 in stock
4Axis5_RLY:Relay driver (parts only!) $3.95 5 in stock
6064A: Adapter cable Pololu $4.95 6 in stock
6064P: Stepper Motor Driver (PCB/SMT ONLY!) $10.95 42 in stock
RULMS3_PIC: Linistepper programmed uC (Chip ONLY!) $5.95 Backordered!   Expected in 1 weeks