Begins localization of environment changes in a batch file. Environment changes made after SETLOCAL has been issued are local to the batch file. ENDLOCAL must be issued to restore the previous settings. SETLOCAL If Command Extensions are enabled SETLOCAL changes as follows: SETLOCAL batch command now accepts an optional argument, which can be either ENABLEEXTENSIONS or DISABLEEXTENSIONS. This will enable or disable the Command process extensions until the matching ENDLOCAL command, regardless of their setting prior to the SETLOCAL command. The SETLOCAL command will set the ERRORLEVEL value if given an argument. It will be zero if one of the two valid arguments is given and one otherwise. You can use this in batch scripts to determine if the extensions are available, using the following technique: VERIFY OTHER 2>nul SETLOCAL ENABLEEXTENSIONS IF ERRORLEVEL 1 echo Unable to enable extensions This works because on old versions of CMD.EXE, SETLOCAL does NOT set the ERRORLEVEL value. The VERIFY command with a bad argument initializes the ERRORLEVEL value to a non-zero value.
file: /Techref/os/win/winnt/slide61.htm, 1KB, , updated: 2004/5/26 15:03, local time: 2024/10/8 04:30,
44.222.134.250:LOG IN ©2024 PLEASE DON'T RIP! THIS SITE CLOSES OCT 28, 2024 SO LONG AND THANKS FOR ALL THE FISH!
|
©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions? <A HREF="http://www.ecomorder.com/techref/os/win/winnt/slide61.htm"> Help for all NT Version 4.0 commands</A> |
Did you find what you needed? |
Welcome to ecomorder.com! |
Welcome to www.ecomorder.com! |
.