Restores files that were backed up by using the DOS BACKUP command. RESTORE drive1: drive2:[path[filename]] [/S] [/P] [/B:date] [/A:date] [/E:time] [/L:time] [/M] [/N] [/D] drive1: Specifies the drive on which the backup files are stored. drive2:[path[filename]] Specifies the file(s) to restore. /S Restores files in all subdirectories in the path. /P Prompts before restoring read-only files or files changed since the last backup (if appropriate attributes are set). /B Restores only files last changed on or before the specified date. /A Restores only files changed on or after the specified date. /E Restores only files last changed at or earlier than the specified time. /L Restores only files changed at or later than the specified time. /M Restores only files changed since the last backup. /N Restores only files that no longer exist on the destination disk. /D Displays files on the backup disk that match specifications.
file: /Techref/os/win/winnt/slide58.htm, 1KB, , updated: 2004/5/26 15:03, local time: 2024/10/3 10:54,
98.80.143.34:LOG IN ©2024 PLEASE DON'T RIP! THIS SITE CLOSES OCT 28, 2024 SO LONG AND THANKS FOR ALL THE FISH!
|
©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions? <A HREF="http://www.ecomorder.com/techref/os/win/winnt/slide58.htm"> Help for all NT Version 4.0 commands</A> |
Did you find what you needed? |
Welcome to ecomorder.com! |
Welcome to www.ecomorder.com! |
.