A simple parity value calculated on columns of data rather than rows, were each successive set of data bit is XOR'd with the prior set to form a new set of parity values.
LRC = LRC ^ dataByte;or
movf dataByte,w xorwf LRC
LRC's by themselves, can only detect errors, but have a slight advantage over standard parity bits in that they are less sensitive to burst errors in serially transmitted data. For example with a drop-out burst error of 3 bits starting after the first bit of the first byte:
10110001 even parity = 0 10000001 even parity = 0 (still) 11011011 even parity = 1 11011011 even parity = 1 -------- -------- 01101010 = LRC 01011010 = LRC
Note that if the data were being transmitted in parallel, the advantage reverts to simple parity, as the LRC becomes sensitive to burst errors.
An 8-bit LRC such as this is equivalent to a CRC using the polynomial x8+1
file: /Techref/method/error/lrc.htm, 1KB, , updated: 2009/1/23 16:20, local time: 2024/10/11 05:40,
44.200.94.150:LOG IN ©2024 PLEASE DON'T RIP! THIS SITE CLOSES OCT 28, 2024 SO LONG AND THANKS FOR ALL THE FISH!
|
©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions? <A HREF="http://www.ecomorder.com/techref/method/error/lrc.htm"> Longitudinal Redundancy Check Data Link Error Detection / Correction Method </A> |
Did you find what you needed? |
Welcome to ecomorder.com! |
Welcome to www.ecomorder.com! |
.