Extruders pump out a material which will self bond after some short time in order to form a solid mass. Most often, this is accomplished with a plastic or other matierial which is heated by the extuder head, or "hot end" which then cools after it is ejected. A spool of plastic filament is pushed into the hot end by the extruder much like an automated version of a hot glue gun.
See also:
file: /Techref/extruders.htm, 1KB, , updated: 2012/12/28 17:21, local time: 2024/11/8 23:31,
44.211.24.175:LOG IN ©2024 PLEASE DON'T RIP! THIS SITE CLOSES OCT 28, 2024 SO LONG AND THANKS FOR ALL THE FISH!
|
©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions? <A HREF="http://www.ecomorder.com/techref/extruders.htm"> Extruders for 3D printing / additive CNC.</A> |
Did you find what you needed? |
Welcome to ecomorder.com! |
Welcome to www.ecomorder.com! |
.