please dont rip this site

Protel : miscellaneous work-arounds

prev: format_conversion.htm -- next: protel_microwave.htm

advice on learning PCB design

see ../pcbs.htm

customizing Protel

How do I customize the menus ?

Many people use Protel without any customization.

Q: How do I customize the menus ? [simple tutorial]

Q: check out http://www.eda.co.uk/support.html ``Comprehensive applications note including a complete tutorial and code for all of the example macros.''

"Geoff Harland" on 2001-05-27 06:55:14 PM wrote:

You should never edit any of the .ins files, as these inform Protel of what Processes are provided by the corresponding Server.

However, if due care is exercised, it is possible to edit the (ASCII/text format) CLIENT99SE.rcs file, which is found in the Windows directory. It is customarily so large in size that Notepad can *not* be used to edit it, and when some other editor is used, it is important that the file be (re)saved in ASCII format (rather than some other format, such as those used by (for instance) Word or Write files).

For the most part though, it is generally better to let Protel itself make any changes to this file, and this will occur (as appropriate) if you customise the resources. If you double-click on the menu bar, a dialog box will be invoked, which will permit you to customise your menu resources. By double-clicking on the title bar (and/or non-button occupied area) of a Toolbar, it is similarly possible to invoke a dialog box which permits you to customise the Toolbar concerned. It is also possible to customise your Shortcut resources, though invoking the associated dialog box is not so straightforward (though this can be facilitated by defining a Shortcut key to invoke this dialog box, and as such, is a "bootstrap" means to facilitate *succeeding* changes to your Shortcut resources).

When a resource is added or edited, you always specify a Process, and optionally specify one or more parameters. (*When* these are provided (which is not always the case), the .HLP file for each Server lists which Processes are provided by each Server, and which parameters (if any) can be used with each of these Processes). In the case of menu resources, you also have to specify what text will be displayed by the menu entry; you can optionally use (no more than) one ampersand (&) character to stipulate that the *following* character will be underlined, e.g. Poly&gon will result in the 'g' character within Polygon being underlined in the resulting menu entry. In the case of Toolbar resources, you typically specify which .BMP file is to be used with the associated button, and the size of this file (# of pixels wide, and # of pixels high) must match that of the files used on existing Toolbar buttons. (I can't remember this size off-hand, but I do recall that the width and height are identical.) You can also optionally specify (by a parameter) what "bubble help" will be provided when the cursor is moved over the corresponding button (in the Toolbar). (It is also possible, by the use of an optional parameter, to specify what text will be displayed in the Status Bar when a particular menu item is being "navigated" over.) And in the case of Shortcut resources, you also have to specify which key combination is to be used with this, e.g. Alt-F12 or Ctrl-Q, etc. (It is also possible to specify that a shortcut key be invoked after *two* consecutive key combinations have been entered, but this is not an option which I have used myself, or at least not to any significant extent).

(Paintbrush can be used to prepare bitmap files for your customised buttons within Toolbars. But be sure that the dimensions of your .BMP files match the dimensions of the .BMP files used by the existing/provided buttons within Toolbars.)

You could do a lot worse then read the on-line help and written documentation provided on how to customise your resources. The above description is really just a summary of what is involved.

Memo to anyone preparing FAQ files for Protel: consider including the above material in a question on customising Protel's resources.

Regards,
Geoff Harland.
-----------------------------
E-Mail Disclaimer
The Information in this e-mail is confidential and may be legally
privileged. It is intended solely for the addressee. Access to this
e-mail by anyone else is unauthorised. If you are not the intended
recipient, any disclosure, copying, distribution or any action taken
or omitted to be taken in reliance on it, is prohibited and may be
unlawful. Any opinions or advice contained in this e-mail are
confidential and not for public display.

How do I customize the fonts or use accented letters ?

fonts on the PWB

  • Q: How do I get foreign characters on my PCB ? (such as the common engineering symbols ± µ Ω and the Deutch letters Ä Ë Ï Ö Ü ß ä ë ï ö ü and other foreign symbols like Å Ñ ñ ) -- (paraphrased from Tommy Åkesson)
    A: I put together a web page about this a while ago. Check it out at: http://www.paulhutch.com/protel_pcb_fonts.htm /* was http://www.fastdial.net/~paulhutch/protel_pcb_fonts.htm */ -- Paul Hutchinson 2001-06-07 [ Web page maintainers: there's a convenient list of symbols at http://www.w3.org/TR/REC-html40/sgml/entities.html#iso-88591 ]

    fonts in the schematic

  • ``Font size is editable in the [schematic] editor. Pin fonts use the system font, which is selectable at Design/Options/ChangeSystemFont. Part Type and other such fields are directly editable to change the font.'' -- Abdulrahman Lomax

    bibliography

    bibliography for schematic editor ../hardware.htm

    bibliography for layout editor ../pcbs.htm

    related products

    Many other companies make products that complement Protel.

    [FIXME: move mailing list links to pcbs.htm#pwb_design_news ?]

    end http://massmind.org/techref/app/protel_customize.htm


    file: /Techref/app/protel_customize.htm, 13KB, , updated: 2003/2/21 16:22, local time: 2024/10/11 05:39, owner: DAV-MP-E62a,
    TOP NEW HELP FIND: 
    44.200.94.150:LOG IN
    ©2024 PLEASE DON'T RIP! THIS SITE CLOSES OCT 28, 2024 SO LONG AND THANKS FOR ALL THE FISH!

     ©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?
    Please DO link to this page! Digg it! / MAKE!

    <A HREF="http://www.ecomorder.com/techref/app/protel_customize.htm"> customizing Protel </A>

    After you find an appropriate page, you are invited to your to this massmind site! (posts will be visible only to you before review) Just type a nice message (short messages are blocked as spam) in the box and press the Post button. (HTML welcomed, but not the <A tag: Instead, use the link box to link to another page. A tutorial is available Members can login to post directly, become page editors, and be credited for their posts.


    Link? Put it here: 
    if you want a response, please enter your email address: 
    Attn spammers: All posts are reviewed before being made visible to anyone other than the poster.
    Did you find what you needed?

     

    Welcome to ecomorder.com!

     

    Welcome to www.ecomorder.com!

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

      .